Stump Crusher Attachments
Turn the Stump Everyone Else Walks Around Into Your Next Finished Job.
Some operators quote the job and hope the stumps cooperate. Others show up with the right crusher and never think twice. Pick your model below, match it to your machine, and be the one who finishes clean.
Find Your Model in 10 Seconds
Start with the machine you already run. The right crusher is the one that matches your carrier, not just the biggest number on the page.
SC-400
Choose this if you run a compact excavator (1.5 to 5 tons)
16" cutting diameter. The right-sized crusher for smaller excavators, tight residential lots, and jobs where a bigger unit would overpower the machine.
SC-500 · SKID STEER
Choose this if you run a skid steer with 13 to 40 GPM
19.7" cutting diameter. The go-to middle ground for skid steer operators who want serious stump capacity without needing a high-flow machine.
SC-600 · SKID STEER
Choose this if you run a skid steer with 17 to 40 GPM
23.6" cutting diameter. The biggest skid steer option for operators who take on large stumps and want to stop turning down work.
SC-600 · EXCAVATOR / BACKHOE / LOADER
Choose this if you run a 3 to 14 ton excavator, backhoe, loader, or track loader
23.62" cutting diameter. Maximum capacity for mid to large carriers, built for operators who clear land for a living.
Side-by-Side Comparison
| Spec |
SC-400 |
SC-500 |
SC-600 (Skid Steer) |
SC-600 (Excavator) |
| Cutting Diameter |
16" |
19.7" |
23.6" |
23.62" |
| Compatible Machine |
Excavators |
Skid Steers |
Skid Steers |
Excavator, Backhoe, Loader, Track Loader |
| Machine Size |
1.5 to 5 tons |
Skid steer |
Skid steer |
3 to 14 tons |
| Hydraulic Flow Range |
See carrier size |
13 to 40 GPM |
17 to 40 GPM |
See carrier size |
| Best For |
Small lots, compact carriers |
All-around skid steer work |
Large stumps, heavy clearing |
Big stumps, big land clearing jobs |
Why Operators Run a Stump Crusher
Say yes to the jobs other guys pass on. When you can handle any stump on the property, your bids get bolder and your calendar fills up.
Use the machine you already own. Bolt it to your existing skid steer or excavator and put it to work. No separate dedicated grinder to buy, haul, and maintain.
Clear faster, finish cleaner. Crush stumps down and move on, instead of spending hours digging and fighting roots.
Look like the pro you are. Show up with the right attachment and the property owner sees someone who takes the work seriously.
How to Order the Right One
1. Select your Model (SC-400, SC-500, or SC-600).
2. Select your Compatible Machine (skid steer or excavator type).
3. Confirm your carrier's tonnage or hydraulic flow (GPM) against the comparison table above, then add to cart.
Frequently Asked Questions
How do I know which model fits my machine?
Skid steer owners should match their machine's hydraulic flow to the GPM range listed (SC-500: 13 to 40 GPM, SC-600: 17 to 40 GPM). Excavator, backhoe, and loader owners should match their machine's weight class (SC-400: 1.5 to 5 tons, SC-600: 3 to 14 tons).
Why are there two SC-600 options?
The SC-600 is built in two configurations: one for skid steers and one for excavators, backhoes, loaders, and track loaders. Choose the one that matches the machine you'll be running it on.
Can I use a bigger model on a smaller machine?
We recommend staying within the listed machine size and flow range for your model. Running an oversized attachment on an undersized carrier hurts performance and can strain your machine.
Not sure which one to pick?
Send us your machine's make, model, and hydraulic flow or weight class, and we'll point you to the right fit before you order.
Stop Working Around Stumps.
Choose your model above and get back to the work that pays.
