Forax GP40 Gas Powered Mulcher For Tractors & UTVs | 40" Cutting Width | Up to 40HP

Fence lines

Clear the brush swallowing your fence so you can see and fix it.

Trails and paths

Open up walking, ATV and horse trails through the woods.

Hunting lanes and food plots

Cut shooting lanes and prep plots before the season.

Saplings and small trees

Stop young trees up to 2–3 inches from taking over.

Thick brush and briars

Knock down the tangles you can't walk through.

Field and pasture edges

Push the overgrowth back and take your acreage back.

1

Hook it on

Attach it to your loader or UTV with the bracket that fits.

2

Start the engine

Pull start or turn the key. Your tractor doesn't power it.

3

Drive forward

Brush goes in the front, fine mulch drops out behind.

Brush goes in, mulch comes out

Nothing to pile, burn or haul

Forget cutting, dragging and stacking brush. The 40 rotating cutters grind it into fine mulch right where it stood, and that mulch breaks down back into the soil. One pass and the job is actually done.

No tractor upgrades

Its own engine does the work

Most mulchers need high-flow hydraulics or a big PTO tractor. The GP40 brings its own 14 or 15HP engine, so your tractor or UTV just carries it. No hydraulic hookups, no PTO shaft, no costly upgrade before you start.

Mounts to your front loader

See every cut from your seat

The GP40 goes where your bucket goes. The cutter sits right in front of you, so there's no twisting around in your seat and no spinning drum behind your back. You see every stump and branch before you hit it.

Pick the mount that fits

Skid steer quick attach, John Deere or bucket clamp

Choose the universal skid steer quick attach, a John Deere bracket, or a bucket clamp for loaders with no quick attach. Order it with the mount and it shows up ready to hook on. Already have a mount? Order it with no bracket.

Works on a UTV too

UTV bracket arms available

On a UTV, the GP40 mounts at the front with UTV bracket arms. Add them in the options above. The arms attach to a plow mount on your UTV, and Kubota UTVs may also need a lift kit. Call us with your UTV make and model and we'll confirm the setup.

Only 350 pounds

Fits small to medium tractors, up to 40HP

Light weight means small machines can carry it. You don't need to buy a bigger tractor. The machine you own right now is most likely all it takes.

Handles more than grass

Brush and small trees up to 2–3 inches thick

Tall grass, weeds, thick brush, briars and saplings up to 2–3 inches in diameter all come out as mulch. It's not a lawn mower, it's a land-clearing tool sized for small machines.

Kohler or Lifan engine

Pull start or electric start

Pick the 14HP Kohler with pull start, or the 15HP Lifan 420cc with electric start. Both are engines repair shops know, with parts that are easy to find. Want it simple? Go electric. Turn the key and it starts.

40 rotatable cutters

Turn it, don't replace it

When one side of a cutter gets dull, turn it to a fresh edge. Your cutters last longer, and you spend less money and time on upkeep. Plus, your order comes with 6 free replacement teeth.

40 inch cutting width

More land cleared each pass

Forty inches cuts a wide path in one pass. Fewer passes means less gas, less time and a finished job sooner.

Simple V-belt drive

Fix it yourself

The GP40 uses a V-belt, like a lawn mower. Easy to see, easy to fix. Belts are cheap and sold at your local parts store, so a small repair won't shut you down for weeks.

Fit guaranteed

Or we make it right

Send us your tractor or UTV make and model before you order and we'll confirm the right mount. If it doesn't fit, we make it right.

Saves you money

Stop paying $1,800 to $3,000 a day

That's what a land crew charges, and your land keeps growing back. Two or three crew days can cost more than the GP40. Pay once, own it for life.

Included free

6 free

Replacement teeth included

Every Forax order from us comes with 6 free replacement teeth, so you're ready when a cutter wears out. Clear your land on your schedule, not a crew's.

Self-contained gas engine: Your hydraulics and PTO stay free.

No high flow needed: Any small tractor can run it.

Front loader mount: Full view and full control.

3 bracket choices: Quick attach, John Deere or bucket clamp.

UTV bracket arms available: Mount it on your UTV.

350 pound frame: Light enough for small tractors and UTVs.

Cuts up to 2–3 inches: Brush, saplings and small trees.

15HP Lifan electric start: 420cc, key start on cold mornings.

14HP Kohler pull start: Trusted engine at the lowest price.

Meets California emissions: Per Forax.

40 rotatable cutters: Turn to a fresh edge for longer life.

6 free replacement teeth: Included with your order.

40 inch cutting width: More ground cleared per pass.

V-belt drive: Cheap, simple and easy to fix.

Fit guaranteed: Or we make it right.

Free delivery: 5–7 days with tracking.

Manufacturer warranty: Parts covered for 1 year or 1,500 hours.

Delivery

5-7 days

Free delivery in 5-7 days. Your tracking number is emailed once your order ships.

Tracking

Your tracking number comes once your order ships. Track your order anytime at sullivanequipmentco.com/apps/parcelpanel.

What's covered

Forax Equipment Ltd will repair or replace, at their discretion, parts found to be defective due to materials and workmanship, for 1 year or 1,500 operating hours from the date of purchase, whichever comes first.

What's not covered

This warranty covers parts only and does not cover labor. It also does not cover parts not fabricated by Forax Equipment Ltd, or damage from misuse, negligence or normal wear and tear.