Baumalight 1P24 - 3 Point Small Tractors Hitch Stump Grinder

Self-adjusting gravity feed

Smooth, even pressure on every stump

The grinder head is hinged. If your tractor moves or jerks, the head adjusts on its own. It keeps steady pressure on the stump. That means smoother grinding and safer work for you.

34 carbide teeth

Longer tooth life and finer mulch

34 bolt-in carbide teeth share the work. Each tooth takes a small bite. Small bites mean less wear, finer mulch, and fewer teeth to replace. You spend more time grinding and less time fixing.

Grinds up to 6 inches below ground

The stump is gone, not just cut down

The 1P24 grinds up to 6 inches below the ground and up to 10 inches above it. It takes up to 5 inches per pass. The stump goes away, so there's nothing left to trip on or mow around.

22 inch side-to-side cut

Built for small and midsize stumps

It sweeps up to 22 inches across in one cut. That covers the small and midsize stumps most land owners deal with. Fewer moves. Faster work.

Heavy 3/4 inch steel rotor

Powers through tough wood

The 24 inch rotor is made of 3/4 inch thick steel. The heavy rotor spins hard and won't flex. You get steady cutting, even in tough wood.

Built-in slip clutch

Protects your tractor

Hit a hidden rock or a sudden jolt, and the slip clutch lets go. That protects your PTO driveline and gearbox. One bad hit won't turn into a big repair bill.

Fits small tractors

CAT 1 hitch, quick hitch ready

The 1P24 fits a standard Category 1 three-point hitch and works with a quick hitch. It's made for hydrostatic tractors up to 50HP. Back up, hook on, connect the PTO, and go.

6 free replacement teeth

In the box with every order

Every order comes with 6 spare teeth at no cost. Got a lot of stumps? Keep going. No parts run. No waiting on a box.

Save on shipping and parts

$0

Freight bill. Shipping is free.

No freight charge on this grinder. You also get 6 free teeth in the box. And 34 teeth sharing the work means each one lasts longer.

Save time on setup

0 hoses

Hook on, connect the PTO, and grind.

No hydraulics to plumb. No guessing at feed pressure, because gravity does it. Grind up to 5 inches per pass and move to the next stump.

No hydraulics needed: Works on tractors without hydraulic remotes. Nothing to plumb or leak.

Self-adjusting gravity feed: Hinged head keeps even pressure on the stump, even if the tractor moves.

34 carbide bolt-in teeth: Smaller bites per tooth mean longer life and finer mulch.

Grinds below ground: Up to 6 inches deep, so the stump is gone, not just cut down.

22 inch horizontal cut: Covers small and midsize stumps with fewer moves.

5 inches per pass: Takes big bites so you finish faster.

24 inch, 3/4 inch steel rotor: Heavy and stiff, so it powers through tough wood without flexing.

Slip clutch PTO shaft: Lets go on a hard hit to save your driveline and gearbox.

CAT 1, quick hitch ready: Standard fit for small tractors. Fast hookups.

Up to 50HP tractors: Made for small hydrostatic tractors.

6 free replacement teeth: Spare teeth in the box, so you keep grinding.

1 year warranty, parts and labor: Covers the part and the work to fix it.

Free shipping: No freight bill. Tracking sent to your email.

5–7 Days

Delivery in 5–7 Days with Tracking

Tracking sent to your email

Once your order ships, we send a tracking number to the email address on file. You'll know where your grinder is the whole way.

What’s covered

Parts and labor. If a covered part fails, you're covered on the part and the work to fix it.

What’s not covered

Misuse, negligence, consequential damage, or expenses such as loss of profit.