AMGO BP-9 Floor Base-Plate 2 Post Lift

TURN YOUR GARAGE INTO A REAL SERVICE BAY

Relying on floor jacks and temporary setups wastes time and increases risk. With a 9,000 lb lifting capacity, this two-post lift transforms your workspace into a proper service bay where vehicles can be raised quickly and safely. It gives you the freedom to work faster, cleaner, and with far more confidence.

STOP STRUGGLING WITH LIMITED SHOP SPACE AND LOW CEILINGS

A cramped workshop slows everything down and limits what you can safely lift or service. The AMGO BP-9 Floor Base-Plate 2 Post Lift is designed for shops working with ceiling heights as low as 9 feet, giving you professional lifting capability without needing a massive facility upgrade. It brings serious workshop performance into tighter spaces where efficiency actually matters.

STOP WASTING TIME ON UNSTABLE LIFTING SOLUTIONS

Unstable lifting setups slow down work and increase safety concerns. The BP-9 features a dual safety lock structure and automatic arm restraints to keep vehicles secure at all times. You get stable, controlled lifting that lets you focus on the job instead of worrying about equipment failure.

FITS MORE VEHICLES WITHOUT CONSTANT ARM ADJUSTMENTS

Not every lift handles different vehicle sizes easily, forcing constant repositioning and wasted time. The symmetric 3-stage retractable arms give you a wide swing range to accommodate a variety of vehicles quickly and efficiently. That means faster setup and smoother workflow on every job.

CONTROL THE LIFT FROM ONE SAFE AND SIMPLE POINT

Complicated safety systems slow down productivity and increase user error. The single-point manual safety lock release allows both columns to unlock simultaneously from one side for faster, safer operation. It simplifies control while keeping safety fully integrated.

BUILT FOR SMOOTH, LOW-MAINTENANCE PERFORMANCE

Equipment downtime kills productivity in any workshop. Self-lubricating UHMW polyethylene sliders help reduce wear and keep operation smooth over time. That means less maintenance interruption and more consistent daily performance.

ENGINEERED FOR REAL WORKSHOP DEMANDS

Cheap lifts struggle under daily commercial use and heavy vehicles. The BP-9 is built with heavy-duty construction, reinforced safety systems, and sync cables designed for long-term reliability. It is made for shops that actually work, not just occasional use.

IMPROVE EFFICIENCY WITH EVERY LIFT CYCLE

Slow lift times add up across a full workday and reduce overall output. With a lifting time of approximately 37 seconds, this system helps speed up workflow without sacrificing control or safety. Faster lifts mean more jobs completed in less time.

GET CLEAN ACCESS TO EVERY JOB

Limited clearance and awkward access points make repairs harder than they need to be. With wide drive-through clearance and adjustable lift heights, the BP-9 gives you better access under vehicles for service, inspection, and repair work. It creates a more efficient working environment from start to finish.

STOP WORKING AROUND YOUR EQUIPMENT AND START WORKING WITH IT

Your tools should improve your workflow, not limit it. The AMGO BP-9 is designed to integrate into real shop environments, giving you dependable lifting power, safety control, and consistent performance. It helps you focus on the work, not the limitations.

FEATURES & BENEFITS

• 9,000 lb lifting capacity
• Base plate design for low ceiling compatibility (9 ft+)
• Dual safety lock structure for secure operation
• Single-point manual safety lock release
• Symmetric 3-stage retractable arms for wide vehicle compatibility
• Automatic arm restraints
• Self-lubricating UHMW polyethylene sliders
• Aero sync cables included
• Detachable toe guard and tool tray
• Rubber pads with extension adapters included

SPECIFICATIONS

WHY BUY FROM SULLIVAN EQUIPMENT CO

At Sullivan Equipment Co, we focus on professional-grade equipment that improves workflow, safety, and efficiency. The AMGO BP-9 delivers reliable lifting power designed for real workshop use, helping you work faster and with greater confidence every day.

Occasionally, an order will leave our facility but is not able to be delivered to the customer by the requested shipping carrier. Please note that shipping accuracy is solely your responsibility. The delivery address must be accurate, and suitable for receiving packages from the carrier. In the event that a package is returned to us by the shipping carrier, re-shipment will proceed at your expense.

Sullivane Quipment Co makes no guarantee that ordered items will arrive by a certain time or date. Any quote regarding delivery date or time frame is merely an estimate. If you absolutely must have product within a certain time frame, you must notify Sullivane Quipment Co at time of order. Most items can be expected anywhere between 2-7 days, but could take up to 21 days, depending on various factors. Sullivane Quipment Co is not responsible for any additional fees customer may incur for rental of equipment for purposes of unloading or other purposes related to receiving product. Sullivane Quipment Co is not responsible if freight company provides customer with a delivery date, and unforeseen circumstances delay shipment further. Once again, any delivery date, provided either by Sullivane Quipment Co or the freight carrier is merely an estimate, not a guarantee of a delivery date. Any number of various shippers may be used to deliver product to destination, depending on the item being shipped, quantity, time and destination. Some larger items will need a loading dock or some other special means to remove item from delivery vehicle. Customers are responsible to provide for these means.

Again, customer is responsible for unloading heavy truck freight shipments from delivery truck, unless other arrangements have been made (ie: liftgate delivery). Additional charges will apply for a liftgate delivery and/or residence delivery. Some items are too large for a liftgate. Customer is also responsible for installation of products, unless otherwise agreed to. Customer must follow the AMGO Hydraulic Corporation installation specifications and instructions for installation and operation exactly otherwise warranty may be eliminated. If freight company attempts delivery and nobody is present to receive shipment, causing a subsequent re-delivery attempt, customer will be responsible for paying a re-delivery fee. Additional charges would also be required if customer needs to re-direct shipment to a different delivery address after order has already shipped. Customer may also be responsible for storage fees if freight carrier must hold product due to customer being unable to receive product for periods of two days or more.

Any items received that fall into the warranty category, (inoperable, or manufacturer’s defect) should be handled under manufacturer’s written warranty conditions. Customer should call Sullivane Quipment Co to have us troubleshoot problem by phone first. Warranty conditions will be provided with all shipments. We will happily assist customers with any warranty service.

Sullivane Quipment Co offers one of the best warranties in the business with warranties as follows: 1. Steel Structure Components (including columns, carriages, lifting arms, top beam, floor cover, platform, cross beam, car drive-in ramp, scissor, base plate, etc.) Warranty for Five(5) Years.  2. Hydraulic Parts (including cylinders, oil seal, oil hose, fitting etc.) Warranty for Three(3) Years.  3. Other Parts(not including consumption parts such as rubber pads), electrical components, power unit have Warranty for Two(2) Years. Warranty coverage would be applicable to the 48 contiguous states. If outside the 48 contiguous states, please call Sullivane Quipment Co. If warranty parts are needed, Sullivane Quipment Co will send them out at our own cost at standard ground shipping rate. If customer needs parts more quickly, it will be the customer’s responsibility to pay for expedited shipping charges. Sullivane Quipment Co will not compensate customers for down time when their equipment is out of service. Sullivane Quipment Co will not compensate customers for time lost if freight is not delivered on the date or time estimated by the freight company.

It is the customer’s responsibility to inspect shipment at time of delivery and refuse shipment if damaged. You have the right to inspect package regardless of what the truck driver says. If item appears to not be damaged, but looks as if there is a possibility of damage, customer should make a note of it on the acceptance slip when signing for shipment. If an item has been damaged during shipment and customer has already accepted / received shipment, it is customer’s responsibility to file a claim with the shipping company. Customer must notify freight carrier and Sullivane Quipment Co within 48 hours of any hidden freight damage. Customer must open all packages within 48 hours of receiving and inventory equipment to verify product was received complete and notify us within 48 hours if there are any problems or missing parts.

We incur many costs when processing and shipping orders. If the order is cancelled before the item has shipped, but after payment has been processed, we will credit customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable.  Customers will be charged for shipping costs for any orders that are canceled after item has already shipped, but not yet received by customer. They may also be responsible for a restocking fee.

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Sullivane Quipment Co. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received.All returned merchandise will be not later than 30 days after the invoice date.

For all merchandise returned to Sullivane Quipment Co for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Sullivane Quipment Co’ Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.