AMGO OH-10 Clear Floor Two Post Lift

STOP STRUGGLING WITH LIMITED WORKSPACE AND HEAVY LIFTS

A cramped shop floor slows everything down and makes safe lifting harder than it should be. The AMGO OH-10 Clear Floor Two Post Lift removes that limitation with a clean, open design that gives you full access under the vehicle. Work faster, safer, and with more control on every job.

STOP GAMBLING WITH UNSTABLE OR UNDERPOWERED LIFTS

Underbuilt lifts create risk every time a vehicle goes up. With a 10,000 lb capacity and industrial-grade construction, the OH-10 is built to handle serious workloads with confidence. It is designed for professionals who need strength they can trust every day.

WORK FASTER WITH A TRUE CLEAR FLOOR DESIGN

Obstructions under or between columns slow down movement and reduce efficiency. The clear-floor layout gives you an unobstructed workspace so you can move freely around vehicles without interference. More space means smoother workflow and faster turnaround times.

SUPERIOR SAFETY THAT PROTECTS YOU AND YOUR VEHICLES

Shop safety should never be optional. The OH-10 includes a single-point safety release, overhead shut-off protection, and ALI certification to ensure controlled operation at every stage. It is built to reduce risk while keeping performance consistent under load.

PRECISION LIFTING WITH SMOOTH HYDRAULIC POWER

Rough or inconsistent lifting can damage vehicles and slow down work. Dual hydraulic direct-drive cylinders provide smooth, stable lifting performance with reliable synchronization through aero cable technology. Every lift feels controlled and predictable.

CONFIGURE IT YOUR WAY FOR DIFFERENT VEHICLES

One-size setups limit the type of work you can take on. The OH-10 supports asymmetric or symmetric arm configurations along with multiple height and width settings. This flexibility allows you to handle a wide range of vehicles without compromise.

BUILT FOR LONG-TERM SHOP USE, NOT LIGHT DUTY WORK

Cheap equipment wears out quickly under daily commercial use. Self-lubricating UHMW sliders and heavy-duty structural components are designed for durability and reduced maintenance. This lift is built to stay reliable over years of continuous operation.

MADE FOR EFFICIENT WORKFLOW AND PROFESSIONAL RESULTS

Every detail is designed to improve productivity in a real shop environment. From tool trays and toe guards to fast 57-second lift time, the OH-10 helps you stay organized and efficient. Less downtime means more completed jobs.

ADAPTS TO DIFFERENT SHOP HEIGHTS AND LAYOUTS

Not every workspace is built the same. Two standard height settings allow installation flexibility for varying ceiling heights while maintaining safe operation. It fits into more shops without requiring costly modifications.

STOP RELYING ON EQUIPMENT THAT HOLDS YOUR BUSINESS BACK

When equipment becomes the limitation, growth slows down. The AMGO OH-10 gives you industrial-grade lifting power, precision control, and certified safety so your shop can handle more work with confidence. Upgrade once and stop second-guessing your lift.

FEATURES & BENEFITS

• 10,000 lb lifting capacity
• Clear floor two-post design for unobstructed workspace
• ALI certified professional-grade construction
• Dual hydraulic direct-drive cylinders
• Asymmetric or symmetric arm configuration
• Single-point manual safety release system
• Overhead safety shut-off protection
• Aero cable synchronization system
• Self-lubricating UHMW polyethylene sliders
• Stackable rubber pads and adapter set included
• Tool trays and toe guards standard
• Two height and width configuration options

SPECIFICATIONS

WHY BUY FROM SULLIVAN EQUIPMENT CO

At Sullivan Equipment Co, we focus on equipment that improves safety, efficiency, and long-term performance in real working environments. The AMGO OH-10 delivers professional-grade lifting power built for serious shops that don’t want downtime or compromise.

Occasionally, an order will leave our facility but is not able to be delivered to the customer by the requested shipping carrier. Please note that shipping accuracy is solely your responsibility. The delivery address must be accurate, and suitable for receiving packages from the carrier. In the event that a package is returned to us by the shipping carrier, re-shipment will proceed at your expense.

Sullivane Quipment Co makes no guarantee that ordered items will arrive by a certain time or date. Any quote regarding delivery date or time frame is merely an estimate. If you absolutely must have product within a certain time frame, you must notify Sullivane Quipment Co at time of order. Most items can be expected anywhere between 2-7 days, but could take up to 21 days, depending on various factors. Sullivane Quipment Co is not responsible for any additional fees customer may incur for rental of equipment for purposes of unloading or other purposes related to receiving product. Sullivane Quipment Co is not responsible if freight company provides customer with a delivery date, and unforeseen circumstances delay shipment further. Once again, any delivery date, provided either by Sullivane Quipment Co or the freight carrier is merely an estimate, not a guarantee of a delivery date. Any number of various shippers may be used to deliver product to destination, depending on the item being shipped, quantity, time and destination. Some larger items will need a loading dock or some other special means to remove item from delivery vehicle. Customers are responsible to provide for these means.

Again, customer is responsible for unloading heavy truck freight shipments from delivery truck, unless other arrangements have been made (ie: liftgate delivery). Additional charges will apply for a liftgate delivery and/or residence delivery. Some items are too large for a liftgate. Customer is also responsible for installation of products, unless otherwise agreed to. Customer must follow the AMGO Hydraulic Corporation installation specifications and instructions for installation and operation exactly otherwise warranty may be eliminated. If freight company attempts delivery and nobody is present to receive shipment, causing a subsequent re-delivery attempt, customer will be responsible for paying a re-delivery fee. Additional charges would also be required if customer needs to re-direct shipment to a different delivery address after order has already shipped. Customer may also be responsible for storage fees if freight carrier must hold product due to customer being unable to receive product for periods of two days or more.

Any items received that fall into the warranty category, (inoperable, or manufacturer’s defect) should be handled under manufacturer’s written warranty conditions. Customer should call Sullivane Quipment Co to have us troubleshoot problem by phone first. Warranty conditions will be provided with all shipments. We will happily assist customers with any warranty service.

Sullivane Quipment Co offers one of the best warranties in the business with warranties as follows: 1. Steel Structure Components (including columns, carriages, lifting arms, top beam, floor cover, platform, cross beam, car drive-in ramp, scissor, base plate, etc.) Warranty for Five(5) Years.  2. Hydraulic Parts (including cylinders, oil seal, oil hose, fitting etc.) Warranty for Three(3) Years.  3. Other Parts(not including consumption parts such as rubber pads), electrical components, power unit have Warranty for Two(2) Years. Warranty coverage would be applicable to the 48 contiguous states. If outside the 48 contiguous states, please call Sullivane Quipment Co. If warranty parts are needed, Sullivane Quipment Co will send them out at our own cost at standard ground shipping rate. If customer needs parts more quickly, it will be the customer’s responsibility to pay for expedited shipping charges. Sullivane Quipment Co will not compensate customers for down time when their equipment is out of service. Sullivane Quipment Co will not compensate customers for time lost if freight is not delivered on the date or time estimated by the freight company.

It is the customer’s responsibility to inspect shipment at time of delivery and refuse shipment if damaged. You have the right to inspect package regardless of what the truck driver says. If item appears to not be damaged, but looks as if there is a possibility of damage, customer should make a note of it on the acceptance slip when signing for shipment. If an item has been damaged during shipment and customer has already accepted / received shipment, it is customer’s responsibility to file a claim with the shipping company. Customer must notify freight carrier and Sullivane Quipment Co within 48 hours of any hidden freight damage. Customer must open all packages within 48 hours of receiving and inventory equipment to verify product was received complete and notify us within 48 hours if there are any problems or missing parts.

We incur many costs when processing and shipping orders. If the order is cancelled before the item has shipped, but after payment has been processed, we will credit customer minus a 3% merchant processing fee. This is a fee that merchant accounts charge on every transaction and is non-refundable.  Customers will be charged for shipping costs for any orders that are canceled after item has already shipped, but not yet received by customer. They may also be responsible for a restocking fee.

Our limited return policy allows you to return defective or incorrectly shipped merchandise. All returned merchandise requires a prior authorization from Sullivane Quipment Co. Contact our customer service representatives first for shipping instructions and to obtain a return authorization number. Any unauthorized returns will be refused and will become the responsibility of the customer and credit will not be issued unless authorization to return merchandise has been received.All returned merchandise will be not later than 30 days after the invoice date.

For all merchandise returned to Sullivane Quipment Co for reasons other than defective or incorrectly shipped items, a 25% restocking fee and return shipping costs (transportation costs) will be deducted from the credit refund. Any and all returned items should be approved through Sullivane Quipment Co’ Customer Service. All returned items must be in their original box or crating and must include all packing material, manuals, and all accessories. At our discretion, an additional restocking fee may be charged if your product is opened or is not returned in its original condition, box, or is missing packing material, manuals, or any accessories. Damaged items will be repaired at the expense of the customer.